Weld Rod Frame Basket with Wire Mesh Liner
Product Category:Furnace Parts+

Qingdao HeXin Machiner fabricates various sizes of custom fabricated Weld Rod Frame Baskets.
Heat-resistant steel mesh baskets can generally be selected according to the steel type and the working temperature of the components. 
The principle of selecting heat-resistant steel welding materials is: the alloy composition and performance of the weld metal are consistent with the corresponding indicators of the base metal.
Or it should meet the performance indicators proposed by the product technical conditions. In order to improve the thermal crack resistance of the weld metal, 
the carbon content in the weld should be slightly lower than the carbon content of the base metal, and should usually be controlled between 0.07% and 0.15%.
Due to the joint action of carbon and alloying elements in steel, heat-resistant steel is easy to form a hardened structure during welding, and the weldability is poor.
 For this reason, heat-resistant steel generally needs to be preheated before welding, and tempered after welding.
Stainless steel mesh baskets are made of stainless steel, 304, 304L, 316, 316L, etc., with smooth surface, no rust, corrosion resistance, non-toxic, hygienic and environmental protection.
Stainless steel mesh basket production process: through bending to make it into a variety of wire mesh crafts. The surface of the net basket can be polished, diffused, sprayed, etc.,
 and can be made into various shapes of crafts according to customer needs.

Components of typical material

 Chemical Components Max.
 C  Si  Mn  P  S  Ni  Cr  Other
SUH 330 ≤0.15 ≤0.50 ≤2.00 ≤0.040 ≤0.030 33.00-37.00 14.00-17.00   1150
AISI 314 ≤0.25 50-3.00 ≤2.00 ≤0.045 ≤0.030 19.00-22.00 23.00-26.00   1150
SUS 310S ≤0.08 ≤0.15 ≤2.00 ≤0.045 ≤0.030 19.00-22.00 24.00-26.00   1090
NCHW1 ≤0.15 0.75-1.6 ≤2.50 --- --  ≥77.00 19.00-21.00 Fe≤1.0 1150
SUS 304 ≤0.08 ≤1.00 ≤2.00 ≤0.045 ≤0.030 8.00-10.50 18.00-20.00   870
SUS 410 ≤0.15 ≤1.00 ≤1.00 ≤0.030 ≤0.030 -- 11.50-13.50   700
SUS 430 ≤0.12 ≤0.75 ≤1.00 ≤0.030 ≤0.030 -- 16.00-18.00   700
DIN 1.4841 ≤0.2 1.5-2.5 ≤2.00 ≤0.030 ≤0.030 19.0-21.00 24.0-26.0   1150

HEXIN Machinery produces various OEM wear and corrosion resistant components for the cement, lime, coal, shot blast machines,and iron Ore industries.
The castings HEXIN made generally are made from special irons and manganese steels, which are critically used in the sectiors of cement manufacturing,coal mining (surface and underground), copper smelting,crushers direct reduction of iron (DRI)
Iron ore manufacturing,Lime manufacturing. All the castings manufactured at HEXIN go through strict quality checks at all stages before being supplied to customers.
Typical Mining & Mineral castings:
Ø Cooler grate plates
Ø Drag chain links
Ø Kiln outlets sector
Ø Immersion tubes for Pre heater
Ø Dipping tube assemblies
Ø Thimbles
Ø Air cannons
Ø Grate plates
Ø Drag chains
Ø Pelletizing grates
Ø Feed chutes
Ø Rotary cooler castings
Ø Burner tips
Ø Liners
Ø Brackets,
Ø Cooler grates
Ø Grate bars
Ø Iron ore feeder rolls
Ø Kiln nose rings
Ø Pallet cars
Ø Precipitator thimbles
Ø Traveling grate components

Contact Us

Tel.: 0086-532-6777 5336    Fax.: 0086-532-8898 7192

skype: zhishuai.liu    Email: info@hexinmachinery.com

Office address: Rm 1402-1403, Excellence Bldg, No.128 Yanji Rd, CBD,Shibei Dist, Qingdao, Shangdong 266000, China

Your Name: Your Email:
Copyright © 2016 Hexin Machinery All Internet        Sitemap