The Influence of Metal Temperature on The
    In investmentcasting process, especially in the axis such as process, the metal temperature is the dominant factor, therefore, also to a lot of quality has a direct impact.If improper measurement and control, metal temperature difference on...

The Role of Cr and Mo In The Gray Cast Ir
    Cr (Cr)1. In the graphitizing effect is strong, stable pearlitic eutectoid transformation2. The elements of chromium is narrowing the gamma area, Cr20 %, gamma area disappear3. The dosage of 0.15% 30%4. The amount is less than 1.0% is still...

The application of the manipulator in the
    With the continuous development of modern foundry industry, for the castings and the requirement of increasing the production efficiency, this is for casting industry will constantly improve the automation level, application in foundry indus...

The Matter Needing Attention Pouring Gray
    In pouring castings (particularly iron), should notice:A slow steady fast, at the beginning of the casting for castings, especially just contact foam liquid metal in the shape of the moment, when the sprue not full or just started pouring of...

Prevention of Ductile Deformation of Cast
    A hoisting ductile casting slab in order to prevent deformation in ductile casting slab.Want to use the four elements of the same length of wire rope and ductile casting slab in the top four lifting holes, the ductile casting slab stationary...

The Application of Manipulator for Invest
    1, precision casting, shell making robots This manipulator can be completed in turn on coating, sanding, drying and other steps, and can automatically collect information of each part, and feedback to the computer.2, sandblasting manipulator...

According to The Chemical Composition for
    Classified by chemical composition of ordinary cast iron for castings: refers to the cast iron does not contain any alloying elements, such as gray cast iron, malleable cast iron, nodular cast iron, etc.; Alloy cast iron: it is in ordinary a...

According to The Chemical Composition for
    Classified by chemical composition of ordinary cast iron for castings: refers to the cast iron does not contain any alloying elements, such as gray cast iron, malleable cast iron, nodular cast iron, etc.; Alloy cast iron: it is in ordinary a...

According to Fracture for Castings Color
    According to fracture for castings color points: (1) of grey cast iron this cast iron carbon most or all exist in the form of free state of flake graphite, the fracture show dark gray, has certain mechanical properties and good cutting perfo...

Process of Precoated Sand
    Sand surface in front of the modelling of precoated sand is covered with a layer of solid resin membrane sand and core sand. With cold and hot hair two laminating process: cold ethanol dissolve resin, and join in the process of sand methenam...

The Matters Attention of Pouring
    Casting is one of the plastic processing methods. Is under the normal pressure liquid monomer or prepolymer in injection mold, after polymerization and curing forming, into the lumen and die products of the same shape. Note strictly implemen...

The Difference Between Casting and Stainl
    The difference between the casting and stainless steel forgings: 1. The casting has good abrasion resistance and elimination function, because the graphite cast iron is helpful to lubrication and oil reservoir, so the wearability. Similarly,...