What Effect About The Cold Deformation of
    A, lost wax casting the effects of cold deformation:After annealing in products, mechanical processing of warping deformation of skew, etc.1, reason: because the casting residual stress, released in the process of bad.2, countermeasure: the...

What Effect About the Thermal Deformation
    When casting from the mold after demoulding, due to the different parts removed, unequal heat shrinkable lead to unequal casting size changes, the casting size.1, the reason: as the product of lost wax casting wall thickness is the same, the...

Happy Chinese New Year 2017!
    The Chinese New Year is a festival whose Chinese are most important.The history of the Chinese New Year is very long.Stanza front stick in an on the face the New Years Day of the implied meaning of the yellow word in red paper in top send m...

How to Accurately Inspect the Casting Def
    Lost wax casting at the time of production and processing of will appear different degrees of casting defects, if the casting defects when we should be how to test?Only under the condition of the casting defect inspection out so as to make o...

Accurate Insepct Casting Defects of Lost
    Lost wax casting for high pressure, vacuum casting, such as pump body, valve, pressure test should be done, to see if there are any holes casting defects.Test will have a certain pressure of the air (or water, oil, etc.) within the casting i...

Accurate Insepct Casting Defects of Lost
    X-ray inspectioncan be found lost wax casting casting internal defects, such as porosity, shrinkage cavity and crack, inclusion, etc.On important castings, such as defense industry with type I castings, typically after 100% of ray inspection...

Accurate Insepct Casting Defects of Lost
    Ultrasonic inspectioncan also be found lost wax casting, internal defects such as porosity, crack, inclusion, shrinkage, etc.Wall thickness of steel, using this method can detect the biggest (1000 mm) of a method.The working frequency of ult...

Wall Thickness Requirements of Precision
    Die casting wall thickness (often referred to as wall thickness) is a special significance in die casting technology factors, the wall thickness has close relationship with the whole process specification, such as filling time of calculation...

The structure of Precision Castings and
    A, the shape of the die casting structure requirements:1, eliminate internal side concave;2, avoid or reduce the core-pulling parts;3, avoid core cross;The reasonable structure of die casting can not only simplify the structure of the die ca...

The structure of Precision Castings and
    A, the shape of the die casting structure requirements:1, eliminate internal side concave;2, avoid or reduce the core-pulling parts;3, avoid core cross;The reasonable structure of die casting can not only simplify the structure of the die ca...

The Rounded Corners Requirement of Precis
    Precision casting in the design of the casting when we want to design all conform to the business of casting and so on the circulation on the market more widely, so we in the design of the casting we should according to the requirements of c...

The Design Requirements of Precision Cast
    Casting design reinforcement requirements:Precision casting steel is thin wall thickness change, in order to improve the strength and rigidity of the parts, prevent to reduce casting contraction deformation, and avoid the workpiece deformati...