After the material into a mold, mold at a lower speed around the single or multiple spindle rotation axis, material by gravity distribution on the inner wall of the cavity, by heating, curing and finalize the design.Used to manufacture the spherical, tubular hollow products, etc.Centrifugal casting.Injected quantitative liquid material, and can be heated by high speed rotation around the single shaft mold, using centrifugal force distribution on the cavity wall material, through physical or chemical effect of curing for tube or hollow tubular products.Monomer casting nylon parts can also be used centrifugal casting process.Precision casting casting molding is generally not pressure strength requirements for equipment and tooling is not high, the products size limit is small, low internal stress in the products.Accordingly, production with less investment, good performance can be obtained from large parts, but a longer production cycle, after forming on mechanical processing.On the basis of traditional casting, derive perfusion, potting, pressure casting, such as rotating casting and centrifugal casting method.>, the employees should also understand the relationship between the stainless steel casting defect generation and its operation.Because the defect is not necessarily a cause of formation, to eliminate or reduce defects must be comprehensive treatment can get good result.Practitioners should work hard to improve the quality of its place, coordinate adjacent process work, avoid defects.